Radial ProMS2 Passive Microphone Splitter Overview
The ProMS2 is a mic splitter designed to split a single source to multiple destinations simultaneously without signal degradation or noise. A high quality Eclipse transformer inside provides galvanic isolation to eliminate hum and buzz from ground loops, while delivering a wide frequency response and low distortion.
Ground lifts on the outputs help further reduce noise, while an input pad allows line-level sources to be connected as well. The ProMS2 can be rack mounted for touring and installation purposes, with up to eight fitting in the Radial J-Rak.
- Audio circuit type
- Passive
- Transformer
- Eclipse ET-MS10
- Frequency response
- 20Hz ~ 20KHz (+0dB -1dB)
- Dynamic range
- >140dB
- Gain
- -0.5dB
- Total harmonic distortion
- 0.00%
- Intermodulation Distortion
- 0.00%
- Phase Deviation
- 1° @ 20Hz
- Input Impedance
- 2.5K Ohms, unbalanced
- Output Impedance
- 140K Ohms, balanced
- Common Mode Rejection Ratio
- -115dB at 60Hz
- Noise
- -140dB
- Maximum Input
- +26dBu
- Input Connectors
- XLR-F
- Output Connectors
- XLR-M
- Construction
- 14-gauge steel chassis & outer shell
- Weight
- 1.55lb (0.7kg)
- Shipping weight
- 1.92lb (0.87kg)
- Power
- Passive, no power required
- Conditions
- For use in dry locations only between 5°C and 40°C
