Shure PGX14/WL93 Overview
Shure PGX14UK93 Wireless Lavalier System (Channel 38) - Comprises a PGX1 Bodypack transmitter with a WL93 lapel mic and a PGX4 diversity receiver. Simply press the channel button on the front of the receiver and it will perform a quick scan of the area and select a clear frequency to avoid any unwanted interference. Once this is done, sync up the receiver with your transmitter by pressing the sync button on the receiver and pointing the infrared port on the transmitter at the receiver. A maximum of 8 musicians can use PGX Wireless systems in parallel. One wireless system consists of one bodypack transmitter and one receiver.Call GAK now for product info, advice and the Best Prices - 01273 665400
- Shure PGX14UK/PG30 Main Features:
- 92m operating range
- Multi-color LED indicating power, lockout, mute and low battery
- The frequency Agile UHF design provides up to 90 selectable UHF frequencies that operate on an 18MHz UHF bandwidth
- More than eight hours of continuous use with two AA batteries
- Carrying case included in every system Diversity Reception system uses twin receiver circuits to minimise noise and drop out caused by RF interference
- Use up to 8 systems simultaneousy
- PGX4 has has XLR and unbalanced 1/4 inch jack audio outputs
- PGX1 includes mute switch and battery power warning lights - 8 hours battery life from 2 x AA 1.5v alkaline batteries
- Dimensions: 40 mm H x 181 mm W x 104 mm D (1.6 x 7.125 x 4.1 in.)
- Weight: 327 g (11.5 oz.)
- Housing: ABS
- Audio Output Level (ref. /- 33 kHz deviation with 1 kHz tone)
- XLR connector (into 600 O load): -19 dBV
- 1/4 inch connector (into 3000 O load): -5 dBV
- Output Impedance: XLR connector: 200 O / 1/4 inch connector: 1kO
- XLR output (Impedance balanced): Pin 1: Ground (cable shield) / Pin 2: Audio / Pin 3: No Audio
- Sensitivity: -105 dBm for 12 dB SINAD, typical
- Image Rejection: >70 dB, typical
- Power Requirements: 12-18 Vdc at 150 mA, supplied by external power supply
- Audio Input Level
- -10 dBV maximum at "mic" gain position
- 10 dBV maximum at 0dB gain position
- 20 dBV maximum at -10dB gain position
- Gain Adjustment Range 30 dB
- Input Impedance 1mO
- RF Transmitter Output 10 mW typical (dependent on applicable country regulations) Dimensions 110 mm H x 64 mm W x 21 mm D (4.3 x 2.5 x 0.8 in.)
- Weight 75 grams (2.6 oz.) without battery
- Housing Molded ABS
- Power Requirements One 9V alkaline or rechargeable battery
- Battery Life Up to 8 hours (alkaline)