EarthQuaker Arrows V2 Preamp Booster Pedal Overview
The EarthQuaker Arrows V2 is an all-discrete tone sculpting preamp booster. It was designed with the intention of adding an additional channel of gain to all your dirt pedals as well as brightening up neck pickups.
- Preamp Booster pedal - Built on all-discrete analog circuitry
- Designed to be stacked; Adds additional gain channel to dirt pedals
- Dirt-simple to use - One knob to rule them all!
- Brightens dark sounding neck pickups
- Boosts midrange and tightens up low-end
- True bypass - Silent soft-touch switching
- New enclosure with Top-mounted jacks - for effortless pedalboard implementation
The Arrows V2 boosts midrange, tightens up the low end and makes the top end shine while adding some push to drive your dirt into blooming sustain with excellent harmonics.
Its simple interface is no nonsense; a single control that will either boost or cut your signal. While the new V2 enclosure, with its top-mounted jacks, make fitting the pedal even into the most crowded pedal board a breeze.
Use the Arrows V2 to remove the muck from bass heavy fuzz pedals, push light overdrives into higher gains than you thought possible or even on its own to make your signal really pop with more pizazz.
All analog, true bypass and handmade one at a time in the weird pit of Akron, Ohio.
- 4.37"³ X 2.37"³ X 1.5"³ with knobs
- Earthquaker Devices pedals take a standard 9 volt DC power supply with a 2.1mm negative center barrel.
- They recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies.
- Switching-type power supplies, daisy chains and non-pedal specific power supplies will not filter dirty power well and will let through unwanted noise.
- Do not run at higher voltages! Current draw is 2 mA.
