JHS Pedals Buffered Splitter

JHS Pedals Buffered Splitter Pedal Overview

The JHS Buffered Splitter pedal takes your input signal and splits it into two always-on buffered outputs, so you don’t lose tone or clarity. It’s a great piece of gear that is a must for anyone’s rig. Passive devices, adaptors and some effects pedals can sometimes affect your sound when splitting your guitar’s signal, making it sound dull, muddy, and quieter. That’s where the JHS Buffered Splitter pedal comes in - it allows you to keep the great sound you want, and also works in other scenarios such as sending one signal to a tuner that’s out of the signal chain while keeping your tone intact, and in a dual-amp setup, both amps will have a powerful, clean signal. Its ultra-compact size means it can easily fit on your pedalboard without taking up too much space, while the rugged black casing lets it subtly stay in the background. The JHS Buffered Splitter does not take two inputs and create one output, if you try to do this it won’t work. If you want to create one output from two inputs, try the JHS Summing Amp pedal.

Overview by JHS

There are so many reasons to add the JHS Pedals Buffered Splitter to your pedalboard. But the most important one is great tone. If you’ve ever split your guitar’s signal with a passive device, adapter, or even certain effects pedals, you know that the results can sometimes be less than stellar. This happens because many of those products simply cut your tone in two, sending one half one way and the other half the other way. You can end up with a tone that is muddy and lifeless. Adding our Buffered Splitter to your chain not only avoids these issues, but it will perfectly drive your long cable runs and pedalboard chains as well. Trust us on this one. If you need to split your signal for any host of reasons, putting our Buffered Splitter on your board will give you your tone back.

SIMPLE AND EFFECTIVE SIGNAL-SPLITTING DEVICE

There are a ton of applications for adding a Buffered Splitter to your signal chain. Whether moving a tuner out of line or running a dual-amp setup, once you use the JHS Buffered Splitter, you’ll never be without one again. Here are just a few options.

Send one signal to a tuner that is out of the signal chain while retaining your full tone
In a dual-amp setup, both amplifiers will see a powerful, clean signal

KEEPS YOUR TONE CLEAR, POWERFUL, AND PRISTINE

If you’re as pedal happy as we are at JHS, you’re going to want this quality buffer in your signal chain. The Buffered Splitter is like giving each output a shot of adrenaline, ensuring they hit your amp with the same strength and character as they left your fingers.

Converts your guitar’s hi-Z signal to lo-Z for driving long cables and pedal chains
Retains the original tone of your guitar without coloration from the other gear in your signal chain

CONVENIENT LOW-PROFILE DESIGN

A device such as the Buffered Splitter is content to be a workhorse piece of gear that quietly does its job in the background. That’s why we designed this little guy to be compact, sturdy, and simple to integrate into your rig.

Small size is ideal for saving pedalboard space
Can easily be mounted underneath your board
Built rugged
Black powder coating keeps the buffer hidden in the background

THIS PEDAL REQUIRES STANDARD 9V DC NEGATIVE POWER, CONSUMES 19MA, AND MEASURES 3.6"X1.5"X1"
THE BUFFERED SPLITTER IS DESIGNED TO WORK WITH INPUT SIGNALS THAT ARE BELOW 10V INPUT GAIN. ANYTHING ABOVE 10V INPUT GAIN WILL CAUSE THE UNIT TO CLIP. NOT RECOMMENDED FOR USE WITH BASS GUITARS.