LD Systems DJ500 Power Amplifier Overview
LD Systems DJ 500PA Power Amplifier 2 x 250W, 4 Ohms
LD Systems DJ500 Power Amplifier
Designed for use by DJ's but also suitable for installation or small band use, the LD Systems DJ 500 is a powerful, full-featured but easy to use power amplifier. The DJ 500 is rated at 250W per channel into 4ohm loads but can be used in bridge mode into a single 8ohm speaker at a punchy 500W.
This classic class A/B power amp is extremely flexible, providing both XLR and 1/4" TRS inputs as well as Speakon and screw terminal outputs allowing connection to almost any system. Ruggedly built to withstand the rigours of live sound, the LD Systems DJ 500 also features a half perforated front panel and quiet fan to maximise cooling, easy grip volume knobs, a ground lift switch to eliminate ground loop hum and overload protection circuits to prevent damage to the amp circuits
With all the features above and full-spectrum operation with a frequency range of 20Hz to 20kHz, this dependable and dynamic amplifier is fantastic choice at a price that won't break the bank.
- Rated ouput power (1kHz @ 4 Ohms): 2 x 250 W
- Rated ouput power (1kHz @ 8 Ohms): 2 x 150 W
- Rated ouput power (1kHz @ 8 Ohms, bridged): 500 W
- Output circuitry: Class A/B
- Frequency response: 20 - 20000 Hz
- Total Harmonic Distortion (THD): 0.05%
- Gain: 30 dB
- Input sensitivity: 0.85 V
- Protection circuits: DC , over-current , short circuit , soft start , thermal overload
- Controls: ground lift , Mode , On / Off , volume
- Indicators: clip , Power , Protect (protection circuit engaged)
- Line inputs: 2
- Line input connectors: 6.3 mm jack , XLR
- Loudspeaker outputs: 2
- Speaker output connections: Speakon compatible , Terminal posts
- Cooling: fan
- Operating voltage: 230 V AC
- Width: 483 mm
- Height: 88 mm
- Depth: 298 mm
- Weight: 9 kg