LD Systems X223 Active Crossover Overview
LD Systems X223 Active Crossover
Crossovers in a PA system perform a basic but essential task - one we take for granted all too often - making sure the correct frequencies of the mix you worked so hard on reach the right amplifiers and speakers and allow you to tune point where your subs crossover with your tops to get the very best sound possible. The LD Systems X 223 Active Crossover is an unbelievably affordable, rack-ready, rugged unit that's easy to use and filled with features.
Stereo 2-Way Mode
The most common use for smaller PA systems, the stereo 2-way mode gives you 2 independent channels both with input gain controls as well as separate output level controls for low and high frequencies. For occasions where you only use one sub, you can even use the BASS SUM function to combine the 2 low frequency outputs to a single mono output, making sure you don't miss a thing!
Mono 3-Way Mode
Used with larger PA setups with separate subs, mids and tops requiring 2 crossover points per speaker stack, the mono 3-way mode reorganises the functions of the X223, with Channel 1 becoming the control for low frequencies and Channel 2 controlling the mid and high frequencies. The XOVER FREQUENCY control on Channel 1 separates the lows and mids, while the same control on Channel 2 separates the mids and highs.
LD Systems X223 Active Crossover you get a professional standard active crossover, offering exceptional sound quality at an unbeatable price.
- Product type: Signal Processors
- Version: 2-way stereo/3-way mono
- Frequency response: 20 - 20.000 Hz
- Dynamic range: 106 dB
- Signal-to-noise ratio: > 93 dB
- Total Harmonic Distortion (THD): < 0.004 %
- Crosstalk: < - 80 (20 - 20.000 Hz) dB
- Max. input level: +21 (balanced or unbalanced) dBu
- Max. output level: +21 (balanced or unbalanced) dBu
- Input impedance (kOhms): 50000 kOhm
- Output impedance: 200 Ohm(s)
- Controls: 2 x crossover frequency low/high , 2 x crossover low/mid , 2 x high gain , 2 x high pass (40 Hz) , 2 x input gain , 2 x low gain , 2x frequency switch x1/x10 , 4 x inv switch , LF sum , Mono/stereo mode
- Indicators: 2 x clip , 2 x crossover x 10 , 2 x highpass , 4 x inv. , mono , stereo
- Line inputs: 2
- Line input connectors: XLR
- Line outputs: 4
- Line output connectors: XLR
- Mains connector: IEC socket
- Operating voltage: 220 V AC - 240 V AC
- Width: 482 mm
- Height: 44.5 mm
- Depth: 153 mm
- Weight: 2.6 kg