Markbass CMD 102P IV 500W 2x10 Bass Combo Overview
This front-ported 2x10 combo is a great option for gigging bassists who want to cut through the mix without a big rig. The more aggressive tone of the 10” speakers means you can often get by just with this combo, but it does also stack with any 8 ohm Traveler or Standard cab, for more volume and headroom. The CMD 102P IV combo is perfect for any situation. The new Little Mark IV Combo head features the new bi-band limiter, a MUTE switch and the 3-way switch that includes the options of Flat, Scooped or FSW. The wedge cabinet design allows to use it either in a standard vertical position or as floor monitor, offering to you the best monitoring on stage.
- LITTLE MARK IV COMBO specs
- INPUTS
- INPUT impedance: 1 Mohm, max. voltage: 9 Vpp
- RETURN impedance: 22 Kohm, max. voltage: 10 Vpp
- CONTROLS
- GAIN –46 dB to +23 dB range
- LINE OUT level control on front panel
- PRE/POST EQ (for line out) switch on rear panel
- GROUND LIFT switch on rear panel
- MUTE SWITCH
- MASTER VOLUME
- EQUALIZATION
- LOW: center frequency 68 Hz; level: ±16 dB
- MID LOW: center frequency 360 Hz; level: ±16 dB
- MID HIGH: center frequency 800 Hz; level: ±16 dB
- HIGH: center frequency 10 kHz; level: ±16 dB
- OLD SCHOOL: max cut range: 250 Hz – 20 kHz
- 3 WAY SWITCH: flat/scooped-mid/FSW
- OUTPUTS
- SEND EFFECTS: unbalanced, max. voltage 20 Vpp
- TUNER OUT: unbalanced, max. voltage 2 Vpp
- LINE OUT balanced XLR, max. voltage 20 Vpp
- SPEAKER OUT: speakon/1/4” combo, 1/4”*
- OTHERS
- BI-BAND LIMITER
- FOOTSWITCH (OPTIONAL): FLAT/SCOOPED-MID
- OUTPUT POWER: 500W RMS @ 4 ohm, 300W RMS @ 8 ohm
- POWER REQUIREMENT:
- 100V; 120V; 230V; 240V 50/60Hz (Voltage is factory preset according to region of sale)
- SPEAKER: 2x10"
- TWEETER: piezo
- BASS PORT: front
- IMPEDANCE: 8 ohms
- SENSITIVITY: 101 dB SPL
- SPEAKER POWER HANDLING:
- 400W RMS (AES Standard)
- FREQUENCY RESPONSE: 40 Hz to 18 kHz
- CROSSOVER FREQUENCY: 3.5 kHz
- WEIGHT: 38.14 lbs / 17.3 Kg
- WIDTH: 23.03 in. / 58.5 cm
- HEIGHT: 18.5 in. / 47 cm
- DEPTH: 18.7 in. / 47.5 cm
- Minimum ohm load for the Little Mark IV Combo head is 4 ohms.
- Markbass amps/combos are manufactured to be sold and used in the country of purchase, and they are factory preset to that country’s voltage. Due to homologation issues, the voltage may not be changed.
- Product specifications are subject to change without notice.
