01273 665 400
lines open 7 days a week Until 7pm on weekdays!
  1. Home

Palmer GA 03 Splitter for Guitars


Palmer GA 03 Splitter for Guitars

Many guitarists like to use 2 apmlifiers at the same time. This can create incredible sounds and be the difference between a good set up and a world class one. However, more often than not it also comes with a classic problem - a loud hum. The Palmer GA 03 Splitter for Guitars is the perfect solution. As you would expect from Palmer guitar tools, the Palmer Y Box is made from powder-coated sheet steel and is tough enough to go on tour with you over and over again. Powered by a single 9V PP3 battery (or a 9-18V centre-negative power supply), the FET input circuitry not only converts the high impedance guitar signal but also drives a transformer which routes the ungrounded signal to the output eliminating ground loop hum.

The PGA03 also features a switchable ground lift alongside a phase reverse switch for output 2 to ensure your signal to both amps is exactly as you need and your sound is perfect. The Palmer GA 03 can even be used simply as a line driver if you have a long cable run and don't want to bleed that tone away.

  • Product type: Splitters
  • Split type: 1 in 2
  • Inputs: 1
  • Input connectors: 6.3 mm jack
  • Adjustable input: no
  • Number of split-outputs per channel: 1
  • Output connectors: 6.3 mm jack
  • THRU outputs/channel: 1
  • Transformer isolated outputs: Yes
  • Adjustable output: no
  • Controls: ground lift , phase
  • Indicators: Power
  • Operating voltage: 9 V block , 9 V DC power supply
  • Width: 125 mm
  • Depth: 80 mm
  • Height: 45 mm
  • Cabinet material: sheet steel
  • Cabinet surface: Powder coated
  • Weight: 0.58 kg

No upgrades available