01273 665 400
lines open 7 days a week Until 7pm on weekdays!
  1. Home

Palmer MACHT 402 Rackmount Stereo Power Amp for Guitar

inc. VAT ex. VAT

Palmer MACHT 402 Rackmount Stereo Power Amp for Guitar

In these days of digital effects, amp modellers and impulse reponses, may guitarists a no longer using traditional amplifiers but will often still need to power a cabinet to amaze the audience with their perfected sound. That's where the Palmer MACHT 402 Rackmount Stereo Power Amp comes in.

  • Stereo guitar power amplifier
  • 200 watts per channel into 4 ohms
  • 400 watts bridged for mono use
  • Carefully tailored, guitar-specific EQ
  • Input sensitivity selector for use with preamps, pedals etc.
  • Built-in limiter
  • All major protections
  • Works with virtually any cabinet(s)

  • Rackmountable for easy transport with your excpetional modeller, the MACHT 402 is designed specially for guitar applications capable of pumping out up to 200W per channel, or a massive 400W in bridge mode. The lightweight, efficient Class D amplifier has a professional switch-mode power supply, low noise and features a soft start. The brilliantly designed Palmer MACHT 402 is fully protected against DC, short circuits, overvoltage and overheating.

    This fully featured power amplifier has an integrated 2-band EQ for each channel that has been specifically tailored to be most useful to guitarists, providing exceptional flexibility for shaping your final tone as well as very authentic tube power stage characteristics. The Palmer MACHT 402 features a 3-way sensitivity selector, ground lift, rumble filtering, LED indicators and even a built-in limiter! It has dicsreet 1/4" and XLR inputs for each channel, and bosts not just 1/4" outputs, but also Speakon compatible outputs, covering almost any type of cabinet you might wish to use.

    However simple or complex your incredible IR and modelling set up might be, or even if you just want to go straight into it from your pedalboard, the Palmer MACHT 402 is the ideal power amp solution.

    PLEASE NOTE: The MACHT 402 is unsuitable for direct connection to a guitar. Be sure to include a preamp, modeller or an effect pedal in between.

    • Rated ouput power (1kHz @ 4 Ohms): 2 x 200 W
    • Rated ouput power (1kHz @ 8 Ohms): 2 x 100 W
    • Rated ouput power (1kHz @ 8 Ohms, bridged): 400 W
    • Output circuitry: Class D
    • Frequency response: 20 - 20000 Hz
    • Total Harmonic Distortion (THD): < 0.1 %
    • Gain: 32 dB / 26 dB / 28 dB
    • Input sensitivity: 0.68 V / 1,4 V / 1,2 V
    • Protection circuits: DC , over-current , short circuit , soft start , thermal overload
    • Controls: ground lift , high , limiter , low , Mode , On / Off , Sensitivity , volume
    • Indicators: clip , Mode , Power , Protect (protection circuit engaged) , Signal
    • Line inputs: 2
    • Line input connectors: 6.3 mm jack , RCA
    • Loudspeaker outputs: 2
    • Speaker output connections: 6.3 mm jack , Speakon compatible
    • Cooling: low-noise fan
    • Operating voltage: Switching power supply
    • Power consumption @ full load: 470 W
    • Operating voltage: 115 V AC / 230 V AC (switchable)
    • Width: 482 mm
    • Height: 44 mm
    • Depth: 244 mm
    • Weight: 3.8 kg

    No upgrades available