Schecter Hellraiser C-7 7 String Black

Schecter Hellraiser C-7, 7 String, Black Overview

The Schecter Hellraiser C-7 is designed and built for hard rock. Its set neck, 26.5" scale, mahogany body, and EMG 707 pickups leave no doubt as to its metal credentials. Black hardware and abalone gothic cross markers give it a dangerous vibe.

Ultra-access neck joint and extra jumbo frets make the Hellraiser C-7 easy to play anywhere on the fretboard.

Schecter Locking Tuners
- Schecter Locking Tuners feature a locking screw pin to lock the string into place for greater tuning stability. Details include a 19:1 gear ratio allowing for precise fine tuning adjustments, removable knobs, threaded peghead bushing, and a 10mm diameter peg hole.
Rosewood Finger Board
- The most common fretboard, Rosewood is naturally oily, and works well for any surface that sees frequent human contact. The sound is richer in fundamental than Maple because the stray overtones are absorbed into the oily pores.
EMG Active 707tw Pickups (Active Version) or USA Schecter Brimstone 7 (Passive Version)
3-pc Mahogany Neck
- Made with 3 pieces of mahogany for extra stability. 3 piece necks can withstand the test of time. Where standard necks may show aging defects from temperature and moisture changes throughout the years, the 3 piece neck will stay nice and straight for a lifetime of playability.
TonePros TOM Bridge w/Thru Body Bridge
- TonePros components complete your instrument! Your bridge and tailpiece will be locked down and will not move or "wiggle" at all. With this design, even play or movement in the threads is reduced so that when you adjust your action and intonation, it is set and solid. Which improves your sustain and tonal qualities, makes harmonics "jump" out of your guitar, and more stable tuning.