Shure PSM300 Band Pack Edition with SE215 Headphones Overview
Shure PSM300 Band Pack Edition with SE215 Headphones Product Overview by GAK
The Shure PSM300 Band Pack Edition with SE215 Headphones has been designed specially for bands, delivering detailed 24-bit digital audio and trustworthy wireless freedom at every corner of the stage. This model allows in-ear monitoring for two band members, including two P3RA bodypack receivers. MixMode® technology gives both users the ability to create their own personal mix on their bodypack while patented Audio Reference Companding ensures crystal clear sound with ultra-low noise and no unwanted artifacts.
The SE215 headphones provide premium warm and detailed sound with resonant bass, and feature a detachable, durable cable. The sound isolating design blocks up to 37dB of ambient noise.
- Built-in audio limiter
- Front mounted antenna
- Two mic/line input channels for mix control
- Built in headphone limiter
- Volume control on bodypack receiver
- 1/2 Rack space
- RF Output Power: 10 - 30 mW (countryspecific)
- Operating Distance: Up to 100m
- Harmonic distortion: 1.5 % typical
- Signal-to-noise-ratio: 80 dB (A) typical
- Listening mode: Mono
- Compatible Systems per band (up to): 4
- Transmitter Inputs: 2x XLR/6,3 mm combo, mic/line level
- Transmitter Outputs: 2x XLR split outputs
- Wired Bodypack Option: Yes
- Personal Mix Control: On transmitter
- Remoteable Transmitter: No
- Battery Life: Wired: 6 h; Wireless: 4 h
- Frequency Response: 30 Hz - 12 kHz
- RF Carrier Frequency Range: 518-865 MHz (country dependent)
- Modulation: FM +/- 35 kHz Deviation (Nominal)
- Operating Temperature: -7 degrees C to +49 degrees C (+20 degrees F to +120 degrees F)
- EP2T TransMixer
- Modulation Limiter: Internal peak limiter (>10:1 hard knee compression)
- Antenna: 1/4 Wavelength, semi-rigid, PCB Mount
- Connector Type: XLR/1/4-inch combo
- Nominal Input Level: - 25 dBu @ 1/2 volume (12 o'clock)
- Maximum Input Level: - 5 dBu @ 1/2 volume (12 o'clock)
- Current: 170 mA maximum
- Dimensions: 220 mm x 140 mm x 40 mm (8.6 in. x 5.6 in. x 1.7 in.)
- Net Weight: 370 g (13 oz.)
- P2R Receiver
- RF Sensitivity: 109 dBm typical
- Squelch Threshold: 102 dBm typical
- Antenna: Attached Whip
- Audio Input Connector: Connector Type: 1/4-inch Mono
- Impedance: 1 megohm
- Maximum Input Level: LO = +0 dBu; HI = 10 dBu
- Frequency Response: 30 Hz to 20 kHz (+/ 3 dB); earphone dependent
- Power Requirements: 9 V alkaline battery, Duracell® type MN1604 recommended
- Audio Output Connector: 1/8 inch (3.5 mm)
- Minimum Load Impedance: 8 ohms
- Net Weight: 100 g (3.52 oz.), less battery
- Overall Dimensions: 122 mm x 73 mm x 32 mm (4.809 in. x 2.875 in. x 1.251 in.)
- SE112 Earphones
- Frequency Range: 25Hz – 17.5kHz
- Sensitivity: 108 dB SPL/mW (@ 1kHz)
- Impedance: 16 Ohms (@ 1kHz)
- Input Connector: 3.5mm (1/8”)
- Colour: Gray
- Cable Length: 127 cm (64”)
- Share This Page