Shure SLXD2/SM86 Digital Wireless Handheld Microphone with SM86 Capsule Overview
Shure SLXD2/SM86 Digital Wireless Handheld Microphone with SM86 Capsule
The new SLX-D series from Shure delivers transparent, 24-bit digital audio and rock solid RF performance in an easy-to-use, easy-to-scale suite of versatile system configurations. Operate up to 32 compatible systems per 44 MHz UHF band, with easy setup and optional rechargeability accessories.
The Shure SLXD2/B86 Digital Wireless Handheld Microphone is designed for use with Shure SLX-D Wireless Systems and features rugged yet sleek, metal-bodied design of the SLDX2 handheld transmitter combined with Shure's stunning SM86 cardioid condenser microphone capsule for unparalleled sonic excellence.
This is not a full wireless system and requires a compatible receiver to operate. This is the UK version (K59) and operates in the 606-650MHz wireless band. If you require a different frequency band, please call the sales team on 01273 665400.
- Transparent 24-bit digital audio
- Extended 20 Hz to 20 kHz frequency range (microphone dependent)
- 120 dB dynamic range
- Digital predictive switching diversity
- 44 MHz tuning bandwidth (region dependent)
- 32 available channels per frequency band (region dependent)
- Up to 10 compatible systems per 6MHz TV band; 12 systems per 8 MHz band
- Easy pairing of transmitters and receivers over scan and IR sync
- Rugged, durable construction
- Battery Type: Rechargeable Li-Ion or 1.5 V AA batteries
- Dimensions (Dia. × L): 1.46 × 6.93 in (37.1 × 176 mm)
- Weight: 5.2 oz. (147 g)
- Housing: Aluminum
- AUDIO INPUT
- Configuration: Unbalanced
- Maximum Input Level: 8.2 dBV (2.57 Vrms, 7.27 Vpp) - dependent on microphone type
- RF OUTPUT
- Antenna Type: Integrated Single-Band Helical
- Occupied Bandwidth: <200 kHz
- Modulation Type: Shure Propietary Digital
- Power: 1 mW/10 mW
- Type: Condenser
- Frequency Response: 50 to 18,000 Hz
- Polar Pattern: Cardioid
- Sensitivity (at 1,000 Hz) Open circuit voltage: -50 dBV/Pa (3.15 mV) (1 Pa = 94 dB SPL)
- Impedance: 150 Ω at 1 kHz
- Recommended minimum load impedance: 600 Ω
- Output Clipping Level 1000 Ω load at 1,000 Hz: +3 dBV (1.41 V)
- Maximum SPL (at 1,000 Hz) 1000 Ω load (1% THD): 147 dB
- Self-Noise: 23 dB typical, A-weighted
- Dynamic Range (1000 Ω): 124 dB (maximum SPL to A-weighted noise level)
- Signal-to-Noise Ratio: 71 dB at 94 dB SPL (IEC 651)
- Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of the output connector
