Walrus Audio Fathom Multi-Function Reverb Pedal Overview
The Walrus Audio Fathom Multi-Function Reverb Pedal is a versatile, compact reverb pedal by boutique pedal makers Walrus Audio, featuring four different reverb algorithms to choose from that deliver anything from small room reverb to oceanic washed-out tones and lush, modulated trails and never-ending decay. Get classic reverb tones with some extra flavours mixed in.
The Walrus Audio Fathom Multi-Function Reverb Pedal has five control knobs so you can fine-tune your tone - Decay (tail length of the reverb), Dampen (treble roll-off). X (changes the functionality depending on the algorithm used), Program (selects the reverb type). The mini-toggle switch adds options to control the modulation intensity.
Hall - A wide, open and vast reverb sound with decay that ends with high-frequency roll-off. The X knob adjusts the pre-delay.
Plate - A full body reverb with smooth decay. The X knob adjusts the pre-delay.
Lo-fi - A filtered reverb with decay ranging from a thin AM-sounding radio to a warm sound. The X knob adjusts filter width.
Sonar - Reverb fed with both high and low octaves and the ability to blend the octaves with the X knob to get tones from another dimension.
The Walrus Audio Fathom Multi-Function Reverb Pedal also has momentary functions - when the pedal is off, press and hold the Bypass Switch to temporarily engage the effect to add a touch of reverb. When you release the switch, it turns the effect off. You can press and hold the Sustain Switch while the pedal is on to extend the reverb for some dreamy crescendos.
Unplug the pedal then press and hold down the Bypass Switch for two seconds while plugging the pedal back in to turn the trails mode on or off.
The Walrus Audio Fathom Multi-Function Reverb Pedal has a rugged construction and heavy-duty footswitches making it built to last, and an Arizona Teal finish with cream and white ink with original artwork by Stuart Dooley, featuring a submarine lost in the depths of the ocean. The top-mounted jacks make it easy to fit onto your pedalboard.
The Walrus Fathom Multi-Function Reverb Pedal is a feature-rich reverb that’s ideal for playing shoegaze, psychedelic, surf rock, post-rock and much more.
Uses a 9v power supply (not included).
- The Fathom comes in a Arizona Teal finish with cream and white ink featuring original artwork by Stuart Dooley of a lone one manned sub lost in the chasmic depths searching for the origins of the mysterious Julia.
- The diecast enclosure’s exact size is 4.77" x 2.6" x 1.39". Power requirements are 9VDC (100mA minimum).
- The use of an isolated power supply is recommended for powering all Walrus Audio Pedals. Daisy chain power supplies are not recommended. Power supply not included.
Pedaltrain Metro 20 Pedalboard with Gig Bag
Pedaltrain Metro 16 Pedalboard with Gig Bag
Boss BIC-10A Instrument Cable, Angled/Straight, 10ft/3m
Boss BIC-20 Instrument Cable, 20ft/6m
Boss BIC-10 Instrument Cable, 10ft/3m
Mooer PC-S Audio Wrap Series Pedal Connector
RockBoard RBO CAB PC F 10 Flat Patch Cable, 10cm
Pedaltrain Classic JR Pedalboard with Gig Bag
Pedaltrain Classic 2 Pedalboard with Hard Case
Pedaltrain Classic PRO Pedalboard with Gig Bag