Audio-Technica AT4051b Condenser Microphone Overview
Audio-Technica AT4051b Microphone Overview by GAKThe Audio-Technica AT4051b is a Cardioid Condenser Microphone ideal for capturing crystal-clear audio, perfect for broadcasting. Professional, robust and versatile, the Audio-Technica AT4051b mic features a small diaphragm plus a cardioid polar pattern which improves isolation of your desired sound source and helps eliminate unwanted noise.
See below for full features and additional overview.
Call GAK now for product info, advice and the Best Prices - 01273 665400
- Specially engineered to meet the most critical acoustic requirements of professional recording, broadcast and sound reinforcement
- High front-to-back rejection ratio-cardioid polar pattern improves isolation of desired sound source
- Direct-coupled, balanced output results in a clean signal even under high-output conditions
- Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
- Switchable 80 Hz hi-pass filter and 10 dB pad
- Rugged turned-brass microphone housing for enduring dependability
- State-of-the-art design and manufacturing techniques ensure compliance with A-T's stringent consistency and reliability standards
- RoHS-compliant - free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS)
- Ideal for professional recording and critical applications in broadcast, this versatile studio performer may be used with confidence in a wide variety of professional miking applications. Featuring direct-coupled balanced outputs for clean signals in high-output conditions, the microphone is totally free of the distortion associated with conventional transformer-coupled outputs. Its fast response to transients contributes to the open, transparent reproduction of even the most difficult-to-capture instruments. The microphone is fully RoHS-compliant - free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS).
- The AT4051b consists of two modular subassemblies: an AT4900b-48 body and an AT4051b-EL cardioid head capsule (both available separately). Additional interchangeable capsules are available in omnidirectional (AT4049b-EL) and hypercardioid (AT4053b-EL).
- ELEMENT Externally polarized (DC bias) capacitor
- POLAR PATTERN Cardioid
- FREQUENCY RESPONSE 20-20,000 Hz
- LOW FREQUENCY ROLL-OFF 80 Hz, 12 dB/octave
- OPEN CIRCUIT SENSITIVITY -34 dB (19.9 mV) re 1V at 1 Pa
- IMPEDANCE 50 ohms
- MAXIMUM INPUT SOUND LEVEL 145 dB SPL, 1 kHz at 1% T.H.D.;
- 155 dB SPL, with 10 dB pad (nominal)
- NOISE 16 dB SPL
- DYNAMIC RANGE (typical) 129 dB, 1 kHz at Max SPL
- SIGNAL-TO-NOISE RATIO 78 dB, 1 kHz at 1 Pa
- PHANTOM POWER REQUIREMENTS 48V DC, 4.8 mA typical
- SWITCH Flat, roll-off; 10 dB pad (nominal)
- WEIGHT 126 g (4.4 oz)
- DIMENSIONS 155.0 mm (6.10") long,
- 21.0 mm (0.83") maximum body diameter
- OUTPUT CONNECTOR Integral 3-pin XLRM-type
- OPTIONAL INTERCHANGEABLE ELEMENTS AT4049b-EL (omnidirectional);
- AT4053b-EL (hypercardioid)
- ACCESSORIES FURNISHED AT8405a stand clamp for 5/8"-27 threaded stands; windscreen; protective carrying case
- AUDIO-TECHNICA CASE STYLE S1