Shure DP11EQE Dynamics Processor Overview
The Shure DP11EQE 1ch Dynamics Processor. A single-channel, digital signal processor that combines a comprehensive dynamics processor, two parametric equalizers, and a delay in a single, half-rack enclosure. The Shure DP11EQE is a single-channel, digital signal processor that combines a comprehensive dynamics processor, two parametric equalizers, and a delay in a single, half-rack enclosure. The DP11EQ can function as a gate, expander, Automatic Gain Control (AGC) leveler, compressor, limiter, and no overshoot peak limiter. All of these features are accessed via the supplied Windows software. You can connect a computer to set up the unit in a sound system, then remove the computer so no one can tamper with the settings when the unit is left unattended. The DP11EQ is designed for installed sound reinforcement applications: theater, conference rooms, meeting halls, houses of worship, etc.Call GAK now for product info, advice and the Best Prices - 01273 665400
- GENERAL:
- - Frequency Response: 20 to 20k Hz /- 1.0 dB re 1 kHz
- - Dynamic Range: 104 dB minimum, A-weighted, 20 Hz to 20 kHz
- - Sampling Rate: 48 kHz
- - Digital-to-Analog, Analog-to-Digital Conversion: 20 bit resolution
- Voltage Gain:
- - 1 dB /- 1dB (power off)
- - 12 dB /- 2 dB (input 10 dBV, output 4 dBu)
- - 12 dB /- 2 dB (input 4 dBu, output 10 dBv)
- - 0 dB /- 2 dB (equal input and output sensitivities)
- Impedance:
- - Input: 47 kilohms /- 20% actual
- - Output: 120 ohms /- 20% actual
- Input Clipping Level
- - 18 dBu minimum (at 4 dBu setting)
- - 6 dBV minimum (at 10 dBV setting)
- Output Clipping Level
- Total Harmonic Distortion
- - < 0.05% at 1 kHz, 4 dBu, 20 to 20 kHz
- LED Signal Indicators
- - Signal: 40 dB
- - Clip: 6 dB down from input clipping
- Propagation Delay from Input to Ouput
- - 0.8 ms (all filters flat, no dynamics processing, 0 ms delay), up to 2.1 ms (all processing enabled)
- Polarity
- - Input to output: inverting optional (default: non-inverting)
- - XLR: pin 2 positive with respect to pin 3
- - 1/4-inch TRS: tip positive with respect to ring
- Operating Voltage
- - DP11EQ: 120 Vac, 50/60 Hz, 50 mA max
- - DP11EQE: 230 Vac, 50/60 Hz, 25 mA max
- - DP11EQJ: 100 Vac, 50/60 Hz, 50 mA max
- Temperature Range
- - Operating: 0 degrees to 60 degrees C (32 degrees to 140 degrees F)
- Fuse
- - DP11EQ: 120 Vac. Fuse: 100 mA, 250V time delay
- - DP11EQE: 230 Vac. Fuse: 50 mA, 250 V time delay
- - DP11EQJ: 100 Vac. Fuse: 100 mA, 250 V time delay
- Dimensions
- - 219 mm x 137 mm x 44 mm (8-5/8 in x 5-3/8 in x 1-3/4 in)
- - Weight: 930 g (2.05 lbs)
- DYNAMICS PROCESSOR
- - Gate and Expander:
- - Threshold: 72 to 1 dB, 0.5 dB resolution
- - Attack: 1.0 to 200 ms
- - Decay: 0.05 to 1 second
- - Gate Hold Time: 0 to 0.5 seconds
- AGC Leveler
- - Attack: 0.2 to 3 seconds
- - Decay: 0.5 to 5 seconds
- - Hinge: Threshold to 1 dB, 0.5 dB resolution
- Compressor and Limiter
- - Knee: Hard or Soft selectable
- No Overshoot Peak Limiter
- - Propagation delay: 1 ms
- - Attack: 0 msDecay: 100 ms
- PARAMETRIC EQUALIZER
- - Parametric Filter Frequency Bands
- - Up to 9 bands, variable frequency, variable Q
- Boost/Cut Range
- - 6 dB to 18 dB per band
- - Q Range
- - 1/40-octave to 2 octave
- High and Low Shelf/Cut Filters
- - Shelf, 6 to 18 dB per filter
- - Cut, 12 dB per octave nominal
- DELAY
- - Up to 1.3 seconds, 21 microsecond resolution