Shure MC50B Electret Condenser Lavalier Microphone Overview
Shure MC50B Electret Condenser Lavalier Microphone Product Overview by GAK
Shure MC50B Electret Condenser Lavalier Microphone is an subminiature omnidirectional microphone which combines unparalleled sound quality with extreme reliability in a small, discrete design.
The MC50B's condenser element provides clear and natural reproduction of speech, improved further by the foam windscreen which minimises breath and wind noises.
This model includes a magnet mount, lapel clip, dual tie clip, pin mount, and two foam windscreens.- Extended frequency response with user changeable equalization caps for response shaping (omni only)
- Low visibility with a variety of options for mounting
- Low handling noise
- Legendary Shure quality, ruggedness, and reliability
- Includes In-line preamplifier and 5-foot (1.5m) cable with TA4F connector
- All models include magnet mount, lapel clip, dual tie clip, pin mount, and two foam windscreens
- Type: Condenser (electret bias)
- Polar Pattern: Omnidirectional
- Output Impedance: 136 ohms actual (rated at 150 ohms)
- Output Level: -41.0 dBV/Pa
- Maximum SPL: 138 dB at 1% THD/1 k ohm load
- Frequency Response: 20-20,000 Hz
- Dynamic Range: 108.0 dB
- Output Noise (equivalent SPL, A-weighted): 30 dB typical; 33 dB maximum
- Signal-to-Noise Ratio: 64 dB at 94 dB SPL
- Power Requirements: 11-52V DC (positive on pins 2 and 3, return on pin 1)
- Current Drain: 4.6 mA
- Polarity: Positive pressure on the diaphragm produces a positive voltage at pin 2 relative to pin 3 of the output connector of preamplifier
- Overvoltage protection: ±75.0 Vdc maximum from pins 2 and 3 to pin 1
- Cap and Overmold Material: Polypropylene
- Environmental Conditions: Operating Temperatures: -18 to 57 degrees C (0 to 135 degrees F), Storage Temperatures: -29 to 74 degrees C (-20 to 165 degrees F), Humidity: 0 to 95%
- Packaged Weight: 305 g (10.76 oz.)
- Cable and Connector: 1.5m (5 ft.), small-diameter, shielded, with miniature female 4-pin connector (TA4F type).
- Preamp Dimensions: 20mm (.79") diameter, 99mm (3.89") length
- Net Weight: 121 g (4.3 oz.) with cable, connector, and preamplifier
