Alesis Strike Amp 12 Drum Monitor Overview
Make Your Sound Your Own You’ve worked hard to perfect your style. It’s yours and yours alone. You have your favourite sticks — just the right weight and length. You love playing those long triplet fills. No one is going to mistake your playing for someone else’s. Same thing with your sound — it has to be uniquely yours. Don’t trust your sound to an ordinary speaker. You need the Alesis Strike Amp 12 powered drumming speaker.
2000 Watts of Room-Shaking Power With 2000 watts of explosive bi-amplified power and super high-performance transducers, this speaker will always play loud and clear, in any space, in any situation — whether you’re performing, recording or rehearsing. The heavy-duty 12-inch low frequency driver really adds the “kick” to kick drum. And the high-frequency compression driver in its computer-optimised waveguide conveys all the brilliance and snap of your snare drum and cymbals.
Feature Packed But there’s a lot more to this speaker than just pure power. A lot more. The Strike Amp 12 has all the versatility and features needed to fit in anywhere and it’s a snap to set up and use. You can use it vertically or tilt it back horizontally like a stage monitor. There’s an XLR output to link another Strike Amp 12 or send your performance to another input device. Need to customise the sound for that “just right” tone? Use the Contour EQ control. And the (2) XLR/TRS 1/4-inch combo inputs with independent volume controls and clip indicator means there is virtually unlimited hookup versatility and you’ll never unknowingly overdrive the speaker into distortion. With its handsome, refined appearance, lightweight but rugged construction and versatile user interface, the Strike Amp 12 is the ideal powered drumming speaker for everyone playing an electronic kit. You’re not just any drummer. Don’t settle for just any speaker.
- 2000 watts of peak power delivers clarity, punch and more than enough headroom for any
- performance or practice space
- Specially-voiced 12-inch woofer and high frequency compression driver deliver your drum sounds
- with precise, full response across the entire frequency range without any artificial colouration
- (2) XLR/TRS 1/4-inch combo inputs with independent volume controls and clip indicator
- XLR output to link another Strike Amp 12 or send your performance to another input device
- Lightweight and flexible tilt-back cabinet design that can also be pole-mounted
- Contour EQ switch to control your sound
- Ground-Lift switch eliminates unwanted noise
- Output Power: 2000W (peak, 1300LF + 700HF) 1000W (continuous RMS, 650LF + 350HF)
- Drivers: Low-Frequency 12.0” (305mm) low-frequency driver, 3.0” (76mm) high-temperature voice coil High-Frequency 1.4” (35mm) voice coil, neodymium-magnet high-frequency driver with precision waveguide
- Crossover: Frequency 2.0KHz
- Maximum SPL: 131dB (peak), 128dB (continuous) (dB-SPL @ 1m)
- Frequency Response: 53Hz – 20kHz (+3dB)
- Frequency Range: 46Hz – 22kHz (-10dB)
- Horn Coverage: 90o horizontal x 60o vertical (nominal)
- Equalisation: Contour switch with low- and high-frequency +3dB boost
- Connectors: (2) XLR/TRS 1/4” (6.35mm) combo inputs (1) XLR link output (1) IEC power cable input
- Controls: Power switch, (2) volume control knobs (1 per input), EQ contour switch, ground-lift switch
- Indicators: (2) power LEDs (1 front-panel, 1 rear-panel), clip limiter LED
- Protection: Electronic clip, thermal & transducer overdrive
- Power: Connection IEC Input Voltage 100V~, 110–120V~, 220–240V~; 50/60Hz (switchable) Fuse 100–120V T10AL AC250V 220–240V T5AL AC250V Consumption 800W
- Enclosure: Trapezoidal, injection-moulded polypropylene enclosure with perforated steel grille
- Dimensions: (width x depth x height) 23.8” x 13.9” x 13.8” 605 x 354 x 350mm
- Weight: 35.9 lb. 16.3kg
