Kramer Baretta Vintage, Maple fretboard, Pewter Gray
Kramer Baretta Vintage, Maple fretboard, Pewter Gray Overview.The Baretta Vintage is a tribute to one of the most iconic and original designs in rock. Featuring a Maple body, Hard Maple neck, a single Seymour DuncanTM JB zebra-coil humbucker, and a Floyd RoseTM 1000 Series Tremolo with R2 Lock Nut. Available in Ruby Red and Pewter Gray.
The Baretta Vintage is inspired by the original homemade single-pickup electric seen on tour with Van Halen in the early 1980s that became every aspiring shredder’s dream guitar: fast, simple, and loud, with incredible articulation, sustain, and accuracy under the most intense stage conditions.
The Baretta Vintage has a classic Kramer “Baretta” Maple body with no binding and is available in two finishes, Ruby Red and Pewter Gray. The bolt-on Maple neck has a Maple fingerboard with a slim profile, 22 medium jumbo frets, a 25.5” scale, a 14” radius, and dot inlays.
For over forty years, the Seymour DuncanTM JBTM zebra coil humbucker featuring Alnico 5 magnets and built at the Santa Barbara, California factory has been the ultimate hot-rodded humbucker. The “JB” is incredibly sensitive and gives players both power and articulation even at high volume. The “JB” is controlled by a single black volume pot.
The Baretta Vintage features a Floyd RoseTM 1000 Series Tremolo along with a R2 Lock Nut for rock solid tuning and intonation. For easy adjustments, two hex wrenches are fastened to the back of the headstock. Black Kramer black die-cast machine heads with a 14:1 tuning ratio make tuning fast and accurate.
- Body: Maple
- Neck: Maple
- Scale: 25.5”
- Fingerboard: Maple
- Fingerboard Radius: 14”
- Fingerboard Inlays: Dot
- Nut: Floyd RoseTM R2 Lock Nut
- Frets: 22 medium jumbo
- Pickup: Seymour DuncanTM “JB™” zebra-coil humbucker
- Controls: Volume (1)
- Strap Buttons: Nickel
- Machine Heads: Kramer 14:1
- Bridge: Floyd RoseTM 1000 Series Tremolo