Orange CR120H Crush Pro Head + PPC212OB 2x12 Cab LTD Bundle, White
This exclusive bundle features the epic Orange CR120H Crush Pro Head paired with the Orange PPC212OB 120W 2x12 cab, both covered in Limited Edition White vinyl.
The Orange Crush Pro Series marks our first foray into the realm of high powered, stage-ready solid state amplifiers. Taking its inspiration from the twin channel circuit in our prestigious Rockerverb series, the Crush Pro range has been developed using high grade solid state components. At Orange we have embraced this analogue technology and honed it to the point of perfection. The result is amplifiers that deliver the warm, rich tonal characteristics that have been our hallmark from the very beginning, coupled with extraordinary levels of versatility and construction to match.
Solid State Never Sounded So Good!
For those who prefer a head and cab setup, the Crush Pro head 120 takes the same features and 120 Watt output stage as the Crush Pro 120 combo and puts it in a lightweight head format. A range of speaker cabinets can be connected via the two parallel speaker outputs (min. 8Ω load), but our personal favourites are our own CRPRO412 cab for its potent midrange or our PPC212OB for its unrivalled chime.
The Clean channel is a vintage-inspired design, with plenty of sparkle. As the volume control increases, the amp begins to break up into bluesy crunch at higher settings with musical, touch sensitive overdrive. The overall output volume can then be reduced to ‘bedroom levels’ with global master volume. The Dirty channel takes its roots from the Rockerverb, covering a wide dynamic range with four stages of gain. Even at the limit, the Dirty channel remains tight and focused with sustain for days! Complete with professional details like a super transparent, fully buffered effects loop, footswitchable digital reverb (hall/spring/plate), and more than enough power for practically any venue, the Crush Pro 120 will always perform, wherever your music takes you.
All analogue signal path: Our commitment to analogue amplifier circuitry in a digital age ensures that the Crush Pro 120 head possess the lively feel and responsiveness that Orange is famous for, inspiring guitarists to play their instruments, not the technology.
Twin channel, high gain preamp design: Our high-gain preamp design puts a truly inspiring range of complex tones in the hands of the player. High quality, low noise components provide four stages of gain with exceptional richness and clarity. The result is amps that deliver everything from blissful cleans, to classic Bluesy Orange crunch all the way through to full-bodied, ultra high gain Metal distortion. Clean and Dirty channels can be switched on the amp’s top panel or remotely using the optional footswitch.
Buffered effects loop: For players who love their pedals, the Crush Pro 120 head has a fully buffered, low impedance loop allows for any number of effects and cables to be patched between the amp’s input and output sections without sacrificing tone. Our attention to detail here means your pedal arsenal will perform to its absolute peak.
Digital reverb Based on a classic 'spring' type, the reverb in the Crush Pro 120 head is an all-new digital module which adds a warm 3D spaciousness to your sound. Ranging from a subtle shimmer to lengthy ethereal trails the circuit features an analogue 'dry through', ensuring your guitar’s tone maintains its integrity as the reverb is blended in.
You can run one of 3 cab configurations:
- One 16 ohm cab connected to the one of the speaker outputs
- Two 16 ohm cabs connected to both speaker outputs, or daisy-chained together to one of the speaker outputs
- One 8 ohm cab connected to one of the speaker outputs
It's better to not daisy-chain, in case the first cable or cab in the chain were to go out during a performance; then you’d lose all your sound. Running a separate cable to each cab insures at least one cab will still be going if a speaker cable or cab goes out during a performance. Use the Orange FS2 to switch reverb on and off and change channels.
The Orange PPC212OB: fitted with a pair of Celestion Vintage 30 speakers, the PPC212OB’s design accentuates the top end frequencies whilst softening the bass response. The split rear panel means the delivery is less directional, creating an airy, spacious and three-dimensional sound. The added presence and chime makes the PPC212OB especially suited for cleaner styles, or for players who want a more vintage combo-type tone from their amp head. The PPC212OB features an 18mm birch plywood shell with our signature skid runners secured to the base to help acoustically couple the cabinet to the stage.
Three dimensional sound: The split rear panel means the delivery is less directional, creating an airy, spacious and three-dimensional sound. The added presence and chime makes the PPC212OB especially suited for cleaner styles, or for players who want a more vintage combo-type tone from their amp head
Celestion Vintage 30 speakers: Superb tones and a tight response require a first rate speaker.
- Twin Channel, Solid State Head
- Digital Reverb (spring/hall/plate)
- Controls (Right to Left):
- Clean Channel: volume, bass and treble.
- Dirty Channel: volume, bass, middle, treble and gain.
- Global: volume and reverb.
- Output Power: 120 Watts
- Speaker Output Options: 14.4kg / 31.75 lb
- Unboxed Dimensions (W x H x D): 55 x 23 x 25 cm (21.65 x 9.06 x 9.6 in)
- Unboxed Weight: 14.4 kg / 31.75 lb
- Straight front, open-back 2x12
- 18mm birch plywood construction
- 2x parallel 1/4in input jacks for ‘daisy-chaining to another 16 Ohm cabinet (total load = 8 Ohms)
- Hard wearing woven paper grille cloth
- Skid runners
- Steel hardware
- Power Handling: 120W (Mono)
- Speakers: 2x Celestion Vintage 30
- Impedance: 16 ohm
- Unboxed Dimensions (W x H x D): 66 x 52 x 30 cm (25.98 x 20.47 x 11.81 in)
- Unboxed Weight: 23.65 kg (52.14 lb)
No upgrades available